Toaiot 3D Printer Build Surface Smooth PEI Sheet 12 x 12 inch / 305 x 305mm 0.01 inch Thickness Build Plate with Strong 3M 468MP Adhesive for CR-10 10S Pro Reprap MP Maker Pro Taz 6

Excellent PEI Platfrom for 3D Printer Heated Bed: With strong 3M Adhesive, compatible with ABS / PLA / HIPS and other filaments, no need for additional adhesives, tapes, or slurry. Special Import Material: made of Polyethermide which is inherently flame resistant and low in smoke production, high strength and heat resistance (up to 340° F), it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. Size: 12 inchx12 inch / 305mm x 305mm. thickness is only 0.01"/ 0.3mm, very thin and level to be table top flat. Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results, the PEI sheets also can be easily cut down to desired size by scoring with a utility knife or blade. Micro bubbles forming in the PEI at high temps are normal and do not affect it. Prints stick pretty good - dont get all agro and force your print off hard - just use a spatula and GENTLY wedge it and GENTLY pry and the print will pop off.