PLA 1.75mm 4x250g Gold/Silver/Glow in Dark/Temperature Change - Filament Set for 3D Printer - FrontierFila

We are happy to stock the excellent PLA 1.75mm 4x250g Gold/Silver/Glow in Dark/Temperature Change - Filament Set for 3D Printer - FrontierFila.

With so many on offer today, it is wise to have a brand you can trust. The PLA 1.75mm 4x250g Gold/Silver/Glow in Dark/Temperature Change - Filament Set for 3D Printer - FrontierFila is certainly that and will be a superb purchase.

For this reduced price, the PLA 1.75mm 4x250g Gold/Silver/Glow in Dark/Temperature Change - Filament Set for 3D Printer - FrontierFila comes widely recommended and is a popular choice amongst many people. FrontierFila have added some nice touches and this equals great value for money.

The thermocromic filament changes color from dark green to yellow-green when warmed above ~32C. In the product picture you can see both colors as part of the roll has been warmed prior to taking the photo. Glow in the dark filament glows in the typical light green color that you would expect. PLA is the traditional, easy to print filament. If you have problems with bed adhesion, try to print the first layer at higher temperature and at a lower speed. Use a brim if necessary. If you still have problems, make sure your printing bed is carefully calibrated. If your bed is a tiny bit too near or far, bed adhesion won't be as good as it could be. If the filament gets stuck and you've checked the nozzle for blockage for no avail, the problem can also be a damaged nozzle throat lining.