0
0
KINGPRINT MKS SBASE V1.3 Smoothieware 32 bit Controller Board for 3D Printer
Price:
£52.99
As of 2021-09-22 05:15:00 UTC (more info)
Product prices and availability are accurate as of 2021-09-22 05:15:00 UTC and are subject to change. Any price and availability information displayed on https://www.amazon.co.uk/ at the time of purchase will apply to the purchase of this product.
Availability:
Not Available
Discontinued
Product Information (more info)
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
Product Description
Discounted 3D Printer Store are inspired to offer the famous KINGPRINT MKS SBASE V1.3 Smoothieware 32 bit Controller Board for 3D Printer.
With so many available recently, it is great to have a make you can recognise. The KINGPRINT MKS SBASE V1.3 Smoothieware 32 bit Controller Board for 3D Printer is certainly that and will be a superb buy.
For this reduced price, the KINGPRINT MKS SBASE V1.3 Smoothieware 32 bit Controller Board for 3D Printer comes highly recommended and is always a popular choice with lots of people. Kingprint have included some excellent touches and this results in good value for money.
Manufacturer Description
Product features:
-Could be connected to touch-screen MKS TFT28.
-Good to work with MKS 12864LCD and MKS TFT touch screen.
-Net Weight:130g
-Dimensions:146.5*95mm
Note:
- Pls confirm whether the positive and negative reversed before powering up again, if the user is due to reverse power and burn, and we do not guarantee such problems.
- Do not plug in case of power motor drive easily lead to burn; do not adjust the current in the motor is running.
The correct approach is to first disconnect the power, unplug the motor, and then re-power, adjust potentiometer, measure the voltage on the potentiometer until the measured voltage is the same as expected.
- MKS Sbase board must be inserted TF card can be used, it must be prepared to TF card, and be careful not to use poor quality TF card.
- Ancillary products is not including, need to purchase:
- 4 stepper motor: 42 motor with line
- Limit switch 3: MKS limit switches
Package Included:
1* MKS SBASE V1.3 32-Bit Controller Board
1*USB Cable
-Could be connected to touch-screen MKS TFT28.
-Good to work with MKS 12864LCD and MKS TFT touch screen.
-Net Weight:130g
-Dimensions:146.5*95mm
Note:
- Pls confirm whether the positive and negative reversed before powering up again, if the user is due to reverse power and burn, and we do not guarantee such problems.
- Do not plug in case of power motor drive easily lead to burn; do not adjust the current in the motor is running.
The correct approach is to first disconnect the power, unplug the motor, and then re-power, adjust potentiometer, measure the voltage on the potentiometer until the measured voltage is the same as expected.
- MKS Sbase board must be inserted TF card can be used, it must be prepared to TF card, and be careful not to use poor quality TF card.
- Ancillary products is not including, need to purchase:
- 4 stepper motor: 42 motor with line
- Limit switch 3: MKS limit switches
Package Included:
1* MKS SBASE V1.3 32-Bit Controller Board
1*USB Cable
Product Features
Using 32bit 100M Cortex-M3 MCU-LPC 1768, and improve its performance highly.
Support highly modular open source firmware Smoothieware, easy for secondary development.
Support network function, through the network cable can directly access the network using the browser to remote control.
Using DRV8825 stepper driver which supports 32-microstep and with excellent cooling.
Currents of the stepper motor can be set directly, which can avoid the damage.
View our full range of Kingprint products
There are no customer reviews yet. Be the first to Write a Review!
.gif)
