EAONE J-Head V6 Hotend Kit
Specification
12V/40W heater,temperature can be up to 280°C?Long-term temperature: 240°C/ short-term temperature: 280°C?
12V high speed fan with shroud, radiating quickly
One meter long PTFE/teflon tubing 4mm OD 2mm ID
PC4-01 tube fitting
Volcano heating block
Outer thread : M6 M7
Nozzle throat outer diameter: 6mm
Nozzle throat inner diameter: 4mm
Teflon pipe inner diameter: 2mm
Length of nozzle throat: 22.5mm
Filament diameter : 1.75mm
Extruder brass nozzle input diameter: 1.75mm
Extruder brass nozzle output diameter: 0.2mm 0.3mm 0.4mm 0.5mm
Volcano extruder nozzle output diameter: 0.6mm 0.8mm 1.0mm 1.2mm
Compatibility: compatible with all 1.75mm V6 E3D Makerbot 3D printer
Attention: Small parts, keep away from children
package including:
1 x all metal V6 hotend 12V/40W/1.75mm/0.4mm nozzle/ extruder
1 x 12V high speed fan with shroud
1 x One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 x PC4-01 Tube Fitting
1 x 0.2mm nozzle print head
1 x 0.3mm nozzle print head
2 x 0.4mm nozzle print head
1 x 0.5mm nozzle print head
1 x 0.6mm volcano nozzle print head
1 x 0.8mm volcano nozzle print head
1 x 1.0mm volcano nozzle print head
1 x 1.2mm volcano nozzle print head
1 x volcano heating block
5 x 1.75mm stainless steel nozzle throat
1 x M3 hex driver
Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 5 pcs brass extruder nozzles(1x0.2mm/1x0.3mm/2x0.4mm/1x0.5mm), 4 pcs brass volcano extruder print head(1x0.6/1x0.8/1x1.0/1x1.2) and a volcano heating block, 5 Pcs stainless steel nozzle throat and M3 hex driver
Specification: brass material extruder nozzles, output diameter 0.2mm/ 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm
Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly
Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking
Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer; NTC connector with terminal, easy to intall