0
dis3dprintlogo
0
Have you seen our United States website? Visit USA today!
We also have websites for: Visit USA Visit USA Visit USA Visit USA Visit USA Visit USA Visit USA

BIGTREETECH Direct SKR V1.4 Turbo Control Board + 5pcs TMC2208 V3.0 UART Mode Driver + TFT35 V2.0 Touch Screen Display for 3D Printer Parter Kit DIY

Price: £171.15
Product prices and availability are accurate as of 2020-11-20 18:27:03 UTC and are subject to change. Any price and availability information displayed on https://www.amazon.co.uk/ at the time of purchase will apply to the purchase of this product.
Availability: In Stock
Usually dispatched within 2 to 3 days.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Product Description

Discounted 3D Printer Store are happy to offer the fantastic BIGTREETECH Direct SKR V1.4 Turbo Control Board + 5pcs TMC2208 V3.0 UART Mode Driver + TFT35 V2.0 Touch Screen Display for 3D Printer Parter Kit DIY.

With so many on offer these days, it is good to have a brand you can trust. The BIGTREETECH Direct SKR V1.4 Turbo Control Board + 5pcs TMC2208 V3.0 UART Mode Driver + TFT35 V2.0 Touch Screen Display for 3D Printer Parter Kit DIY is certainly that and will be a perfect buy.

For this great price, the BIGTREETECH Direct SKR V1.4 Turbo Control Board + 5pcs TMC2208 V3.0 UART Mode Driver + TFT35 V2.0 Touch Screen Display for 3D Printer Parter Kit DIY is highly recommended and is a popular choice with many people. BIGTREETECH Direct have added some great touches and this results in good value.

Product Features

?1.?SKR V1.4 Turbo?: Using 32-bit main frequency 120MHz ARM level Cortex-M3 series LPC1768 main control chip, the performance has been greatly improved; ?2.?SKR V1.4 Turbo?: Using dedicated power chip M6130, support 12-24V power input; ?3.?SKR V1.4 Turbo?: Double z-axis interface, eliminating the trouble of external drive expansion module; ?4. ?TMC2208 Ultra-quiet?: Stealth Chop can make the engine work in extreme silence ?5. ?TFT35 V2.0?: Power interface: DC5V TFT3.5 V2.0 After the main board is powered on, the D3 blue light in the lower left corner will light up, indicating that the power supply is normal. (
Note:
There has 5V on the board to power the TFT Screen,use jumper cap to connect it.If you have any questions,please feel free to QA us.

Write a Review