This heatbed made of 3 mm aluminum and it works as heat producer, heat spreader and print surface of Delta 3D printer such as Kossel Mini.
You can print directly on it (use blue masking tape or kapton to improve adhesion), or you can put borosilicate glass on top.
Heat bed comes pre-wired, with resistor and LED soldered for your convenience.
Please note: there is no thermistor installed on the board or included in the listing. Please, install your own thermistor - tape it to the bottom of the board with polyimide tape.
Dimensions: 220mm diameter
Mounting hole diameter: 3mm
Material: Aluminum 3mm thick
Power Input: 12V/24V
Cable: 60cm 16AWG cable
1* Dual power MK3 Round Aluminum Heatbed with cable
You can print directly on it (use blue masking tape or kapton to improve adhesion)
It makes 3D Printers like kossel and rostock can print ABS
Dual power supply, operate at 12V or 24V