dis3dprintlogo

Reprap Ramps1.4 RRD Fan Extender

Price: £12.00
Product prices and availability are accurate as of 2019-02-16 21:49:53 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.co.uk/ at the time of purchase will apply to the purchase of this product.
Usually dispatched within 6-10 business days
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Product Description

We are happy to present the famous Reprap Ramps1.4 RRD Fan Extender.

With so many available recently, it is wise to have a make you can trust. The Reprap Ramps1.4 RRD Fan Extender is certainly that and will be a excellent buy.

For this reduced price, the Reprap Ramps1.4 RRD Fan Extender comes highly recommended and is a popular choice for most people. Geeetech have included some nice touches and this means good value for money.

Manufacturer Description

Want to connect a firmware controlled FAN to RAMPS board directly when you build or upgrade your printer with/to DUAL-EXTRUSION (2 extruder) including a heated bed, but found that all the output ports (D8,D9,D10) will be used? The RRD-FAN-EXTENDER is exactly what you need in this case. It is a plug and play solution to mount the FAN for DUAL-EXTRUSION setups with RAMPS1.4. But instead of adding only one additional output port the RRD-FAN-EXTENDER is equipped with 2 PWM controllabe channels(D6/D11). The second channel can be used for another fan(e.g. to cool the stepper driver) or for adding light control (e.g. add dimmable LED light to your machine). Features: Max 20V 2 (PWM controllable) channels (D6/D11) Max 0.5A per channel (enough for a really big fan) Flexible output voltage (you can connect the RRD-FAN-EXTENDER to 12V,5V,... in order to support The output voltage you need) Each channel has a fly back diode Easy setup (plug and play) Supported by Marlin firmware (choose "#define MOTHERBOARD 34") Easy to adapapt to other firmware (e.g. Sprinter: just change "#define FAN_PIN 6" in "pins.h") For more information about this product, please check our wiki page Documents:
View our full range of Geeetech products

Write a Review

Fresh Store Builder - The Most Advanced Amazon Affiliate Software