dis3dprintlogo

DorisDirect Stepper Motor Nema 17 Bipolar 48mm 84oz.in(59Ncm) 2A 4 Lead with 1m Cable and Connector for 3D Printer Hobby CNC

Price: £25.99 £13.99
Product prices and availability are accurate as of 2019-01-14 17:05:29 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.co.uk/ at the time of purchase will apply to the purchase of this product.
You Save: £12.00 (46%)
Usually dispatched within 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Product Description

Discounted 3d Printer Store are proud to offer the famous DorisDirect Stepper Motor Nema 17 Bipolar 48mm 84oz.in(59Ncm) 2A 4 Lead with 1m Cable and Connector for 3D Printer Hobby CNC.

With so many available right now, it is good to have a name you can recognise. The DorisDirect Stepper Motor Nema 17 Bipolar 48mm 84oz.in(59Ncm) 2A 4 Lead with 1m Cable and Connector for 3D Printer Hobby CNC is certainly that and will be a superb acquisition.

For this great price, the DorisDirect Stepper Motor Nema 17 Bipolar 48mm 84oz.in(59Ncm) 2A 4 Lead with 1m Cable and Connector for 3D Printer Hobby CNC is highly recommended and is a regular choice for lots of people. Doris Direct have added some nice touches and this equals great value for money.

Manufacturer Description

Manufacturer Part Number 17HS19-2004S1:
Step Angle 1.8°
Step Accuracy 5%
Holding Torque 59Ncm(83.6oz.in)
Rated Current/phase 2.0A
Phase Resistance 1.4ohms
Voltage 2.8V
Inductance 3.0mH20%(1KHz)
Weight 400g
Frame Size: 41 x 41mmv Body Length: 47mm
Shaft Diameter: 5mm
Shaft Length: 22mm

Connection:
Black(A+), Green(A-), Red(B+), Blue(B-) 

Package Including:
1 x Nema 17 stepper motor with 1m Cable & Connector

Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.

Product Features

Nema 17 Stepper Motor 83.6 oz.in (0.59 Nm) 47mm Body 1.8 degree with 1M 4-pin Cable and Mounting Bracket Kit DIY 3D Printer CNC Robot. 1m wire, one connect electrical machine, on the other end has variety optional ports; heat shrink tubing effect to prevent the wire tangled up. 4-wire 1M Lead w/ Insulated Sleeve - Detachable for easy installation. Step Angle 1.8°?Holding Torque 59Ncm(83.6oz.in)?Phase Resistance 1.4ohms?step angle (200 steps/rev.) New designed NEMA 17 Stepper Motor Alloy Steel Mounting Bracket can match standard Nema 17 stepper motor, and also include the mounting holes for Nema 17 Planetary Geared Stepper Motor.

Write a Review

Fresh Store Builder - The Most Advanced Amazon Affiliate Software