dis3dprintlogo

Doris Direct 3 PCS Nema 17 Stepper Motor Bipolar 2.0 A 83.6oz.in(59Ncm) 47mm Body 4-lead w/1m 4-Pin Cable +3 PCS Nema 17 Mounting Brackets for 3D Printer/CNC

Price: £49.99 £27.99
Product prices and availability are accurate as of 2019-01-17 01:01:48 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.co.uk/ at the time of purchase will apply to the purchase of this product.
You Save: £22.00 (44%)
Usually dispatched within 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Product Description

Discounted 3d Printer Store are delighted to present the fantastic Doris Direct 3 PCS Nema 17 Stepper Motor Bipolar 2.0 A 83.6oz.in(59Ncm) 47mm Body 4-lead w/1m 4-Pin Cable +3 PCS Nema 17 Mounting Brackets for 3D Printer/CNC.

With so many on offer today, it is wise to have a make you can trust. The Doris Direct 3 PCS Nema 17 Stepper Motor Bipolar 2.0 A 83.6oz.in(59Ncm) 47mm Body 4-lead w/1m 4-Pin Cable +3 PCS Nema 17 Mounting Brackets for 3D Printer/CNC is certainly that and will be a excellent buy.

For this reduced price, the Doris Direct 3 PCS Nema 17 Stepper Motor Bipolar 2.0 A 83.6oz.in(59Ncm) 47mm Body 4-lead w/1m 4-Pin Cable +3 PCS Nema 17 Mounting Brackets for 3D Printer/CNC comes widely respected and is always a regular choice amongst most people. Doris Direct have provided some nice touches and this means great value.

Manufacturer Description

Manufacturer Part Number 17HS19-2004S1:
Step Angle 1.8°
Step Accuracy 5%
Holding Torque 59Ncm(83.6oz.in)
Rated Current/phase 2.0A
Phase Resistance 1.4ohms
Voltage 2.8V
Inductance 3.0mH±20%(1KHz)
Weight 400g
Frame Size: 41 x 41mmv Body Length: 47mm
Shaft Diameter: 5mm
Shaft Length: 22mm

Mounting Bracket Kit Specification:
Three Pack - NEMA 17 Mounting Bracket - 90 degrees
- M3 Screws Included (12)
- Mounting Holes: 31mm center-to-center
- Max Collar Diameter: 22mm
- Powder-coated steel
- Nema17 Standard

Package Including:
3 Pack Nema 17 stepper motor with 1m Cable & Connector
3 Pack - Nema 17 Stepper Motor Mounting Bracket
12 pcs M3 Screws

Product Features

Nema 17 Stepper Motor 83.6 oz.in (0.59 Nm) 47mm Body 1.8 degree with 1M 4-pin Cable and Mounting Bracket Kit DIY 3D Printer CNC Robot. 3pcs NEMA-17 Stepper Motor mounting Bracket Kit DIY 3D Printer CNC Robot and 12 pcs M3 Screws 1m wire, one connect electrical machine, on the other end has variety optional ports; heat shrink tubing effect to prevent the wire tangled up. 4-wire 1M Lead w/ Insulated Sleeve - Detachable for easy installation. Step Angle 1.8°?Holding Torque 59Ncm(83.6oz.in)?Phase Resistance 1.4ohms?step angle (200 steps/rev.)

Write a Review

Fresh Store Builder - The Most Advanced Amazon Affiliate Software